Search

Gamdias ATHENA M1 Elite RGB Mid Tower Gaming Case

Model: ATHENA M1 Elite | 3 Built-in 120mm Trio Rings ARGB Fans | Asymmetry Mesh Design | ARGB Sync via Motherboard | Seamless Tempered Glass Window |
Brand:
BDT 6,700
decrease increase

Gamdias ATHENA M1 Elite RGB Mid Tower Gaming Case

ATHENA M1 Elite is a mid-tower case with asymmetry mesh front panel and three built-in 120mm trio rings ARGB fans on the front. With this design, the pursuit of high heat dissipation, increase air flow, and eye catching design is achieved.

Unique and Functional

Adopting a detachable asymmetry mesh and three built-in 120mm trio rings ARGB fans, ATHENA M1 Elite provides not only an unique look but also maximum air flow through the case.

Sparkling Everywhere

To satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by neo chrome streaming lights, with more than 20 lighting effects.

One Click, Sync All

ATHENA M1 Elite supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, makes you easier to unite your case from chaos to calm.

Power Supply Cover Design

Building upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU.

Magnetic Dust Filter

A magnetically held dust filter, located on top of the ATHENA M1 Elite to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.

Seamless Tempered Glass

To build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC.

Light It Up, Speed It Up

A single easy push button, controls the 3 ARGB fans and lights surrounded by I/O port, cycling though the different effects and LED off. Another button controls the fans; high, mid, and low speeds, whichever suites your cooling needs.

Improved Cable Management

To achieve the best PC building experience the ATHENA M1 Elite has an enlarged cable management compartment behind the mainboard plate. Tuck away all your excess cables for an extra clean system and improved case airflow.

Ample Accommodation

The accommodation inside ATHENA M1 Elite is able to support up to three 120mm or 140mm fans up front. Multiple mounting points for 360/280mm radiators upfront, 280/240mm and a 120mm radiator at the rear.

Gamdias ATHENA M1 Elite RGB Mid Tower Gaming Case

ATHENA M1 Elite is a mid-tower case with asymmetry mesh front panel and three built-in 120mm trio rings ARGB fans on the front. With this design, the pursuit of high heat dissipation, increase air flow, and eye catching design is achieved.

Unique and Functional

Adopting a detachable asymmetry mesh and three built-in 120mm trio rings ARGB fans, ATHENA M1 Elite provides not only an unique look but also maximum air flow through the case.

Sparkling Everywhere

To satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by neo chrome streaming lights, with more than 20 lighting effects.

One Click, Sync All

ATHENA M1 Elite supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, makes you easier to unite your case from chaos to calm.

Power Supply Cover Design

Building upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU.

Magnetic Dust Filter

A magnetically held dust filter, located on top of the ATHENA M1 Elite to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.

Seamless Tempered Glass

To build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC.

Light It Up, Speed It Up

A single easy push button, controls the 3 ARGB fans and lights surrounded by I/O port, cycling though the different effects and LED off. Another button controls the fans; high, mid, and low speeds, whichever suites your cooling needs.

Improved Cable Management

To achieve the best PC building experience the ATHENA M1 Elite has an enlarged cable management compartment behind the mainboard plate. Tuck away all your excess cables for an extra clean system and improved case airflow.

Ample Accommodation

The accommodation inside ATHENA M1 Elite is able to support up to three 120mm or 140mm fans up front. Multiple mounting points for 360/280mm radiators upfront, 280/240mm and a 120mm radiator at the rear.

Products specifications
Case Type
TypeMid Tower
Tempered Glass PanelSeamless Tempered Glass Window
Motherboard SupportATX, Micro-ATX, Mini-ITX
External Features
Color(s)Black
Weight6.6 kg
Dimensions430 x 220 x 490 mm
Expansion Slots7
Radiator SupportTop: 280 mm ,240mm
Front: 360 mm, 280 mm, 240 mm
Rear: 120 mm
Fan SupportTop: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 3 x 140mm , 2 x 200mm
Rear: 1 x 120mm, 1 x 140mm
Pre- Installed FansFront: 3 x 120mm ARGB Fans (Compatible with AEOLUS Box)
Rear: 1 x 120mm Fan
Drive Bays2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage)
1 x 2.5"
I/O Port6 Ports Hub (3 ports are used)
Additional Feature
PSU200mm
Side PanelSeamless Tempered Glass Window
Clearance Space
Maximum Processor Cooler Height165mm
Maximum Graphics Card Length350mm
Filters
Sort
display
(x)